Enable Password; Enable Restricted - Dell PowerEdge M I/O Aggregator Reference Manual

enable password

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands

enable restricted

Syntax
202 | Security
Change the password for the
enable password [ level level
To delete a password, use the
command.
level level
encryption-type
password
No password is configured.
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
Use this command to define a password for a level.
Passwords must meet the following criteria:
• Start with a letter, not a number.
• Passwords can have a regular expression as the password. To create a password with a regular
expression in it, you must use CNTL + v prior to entering regular expression. For example, to
create the password abcd]e
do not use the CNTL + v key combination and enter "
Note:
The question mark (?) and the tilde (~) are not supported characters.
show running-config
Allows Dell Force10 technical support to access restricted commands.
enable restricted [ encryption-type
To disallow access to restricted commands, use the
enable command.
] [ encryption-type ] password
no enable password [ encryption-type
(OPTIONAL) Enter the keyword
access.
Range: 1 to 15
(OPTIONAL) Enter the number
7
Enter a followed by a text string as the hidden password. The text string must
be a password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
running-config
file of another Dell Force10 router.
Enter a text string, up to 32 characters long, as the clear text password.
level = 15
, you type " abcd CNTL v
Views the current configuration.
] password
no enable restricted
] password [ level level
level
followed by a number as the level of
7 0
or as the encryption type.
]e ". When the password is created, you
abcd]e ".
command.
]
show