Enable Restricted - Dell S6100 Configuration Manual

Usage Information
To control access to command modes, use this command to define a password for a level and use the privilege
level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
•
•
Related Commands
•
•

enable restricted

Allows Dell Networking technical support to access restricted commands.
Syntax enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted command.
Parameters
encryption-type
password
Defaults Not configured.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
1394 Security
Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a password with a regular expression in it,
use CNTL + v prior to entering regular expression. For example, to create the password abcd]e, you type
"abcd CNTL v ]e". When the password is created, you do not use the CNTL + v key combination and enter
"abcd]e".
NOTE: The question mark (?) is not a supported character.
show running-config — views the current configuration.
privilege level (CONFIGURATION mode)
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Networking router.
Use this parameter only with a password that you copied from the show running-
config file of another Dell Networking router.
Enter a text string, up to 32 characters long, as the clear text password.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
— controls access to the command modes within the switch.