Monitoring Configured And Operational Summary Status; Table 89: Show L2Tp Session Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Meaning
Related Topics

Monitoring Configured and Operational Summary Status

Purpose
Action
432
Bearer type is none
Framing type is none
Proxy LCP was provided
Authentication method was chap
Tunnel switch profile is chicago
Table 89 on page 432 lists the show l2tp session command output fields.

Table 89: show l2tp session Output Fields

Field Name
Configuration
Administrative state
SNMP traps
Session status
Effective administrative state
State
Local and peer session id
Statistics
Session operational configuration
show l2tp session
Display a summary of the configured and operational status of all L2TP sessions.
To display a summary of the configured and operational status of all L2TP sessions:
host1#show l2tp session summary
Administrative status enabled
64
Field Description
Configured status of the session
Administrative status of the destination:
enabled—No restrictions on the operation of this
session
disabled—Router terminated this session
Whether or not the router sends traps to Simple
Network Management Protocol (SNMP) for
operational state changes
Session status of the destination
Most restrictive of the following administrative states:
router, destination, tunnel, and session. This setting,
rather than the administrative state of the session,
determines whether the router can maintain this
session or not.
Status of the session: idle, connecting, established,
or disconnecting
Names the router uses to identify the session locally
and remotely
Information about the traffic for this session
Information received from the peer when the session
was created
disabled
0
Copyright © 2010, Juniper Networks, Inc.