Display Ip Routing-Table Ip_Address1 Ip_Address2; Display Ip Routing-Table Ip-Prefix - 3Com 5500G-EI Command Reference Manual

display ip routing-table
ip_address1 ip_address2
display ip routing-table
ip-prefix
Age: 3:47 Cost: 0/0
For detailed description of output information, refer to
Syntax
display ip routing-table
[ verbose ]
View
All views
Parameters
Enter the destination IP address and subnet mask that you
ip_address1 mask1
want to start the address range. This command displays the route for your chosen
address range. The subnet mask can be entered as either a dotted decimal
notation (x.x.x.x), or an an integer in the range 0 to 32.
Enter the IP address and subnet mask that you want to end
ip_address2 mask2
the address range. The subnet mask can be entered as either a dotted decimal
notation (x.x.x.x), or an an integer in the range 0 to 32.
Enter to display the verbose information of both the active and inactive
verbose
routes. Without this parameter, the command only displays a summary of active
routes. Optional.
Description
Use the
display ip routing-table
command to view the route information for the specified address range.
Example
To display the routing information of destination addresses ranging from 1.1.1.0
to 2.2.2.0., with a subnet mask of 24, enter the following:
<SW5500>display ip routing-table 1.1.1.0 24 2.2.2.0 24
The information displays in the following format:
Routing tables:
Summary count: 3
Destination/Mask
1.1.1.0/24
1.1.1.1/32
2.2.2.0/24
For a detailed description of the output information, refer to
Syntax

display ip routing-table ip-prefix

View
All views
ip_address1 m
ip_address1 mask1 ip_address2 mask2
Proto Pre Cost Nexthop
DIRECT 00 1.1.1.1
DIRECT 00 127.0.0.1 InLoopBack0
DIRECT 00 2.2.2.1
ip_prefix_name
Routing Table Display Commands
Table 18.
ask1 i p_address2 mask2
Interface
Vlan-interface1
Vlan-interface2
Table 17.
[ verbose ]
151