3Com S7906E Command Reference Manual page 87

Parameters
interface-type: Type of a specified interface.
interface-number: Number of a specified interface.
|: Uses a regular expression to filter output information. For detailed description on regular expression,
refer to Basic System Configuration in the System Volume.
begin: Displays the line that matches the regular expression and all the subsequent lines.
exclude: Displays the lines that do not match the regular expression.
include: Displays the lines that match the regular expression.
regular-expression: Regular expression, a string of 1 to 256 characters. Note that this argument is
case-sensitive.
Description
Use the display brief interface command to display brief interface information.
If neither interface type nor interface number is specified, all interface information will be displayed.
If only interface type is specified, then only information of this particular type of interface will be
displayed.
If both interface type and interface number are specified, then only information of the specified
interface will be displayed.
Related commands: interface.
Examples
# Display the brief information of interfaces.
<Sysname> display brief interface
The brief information of interface(s) under route mode:
Interface
Loop0
Loop1
Loop2
M-E0/0/0
NULL0
Tun3/0/20
Vlan1
Vlan2
Vlan3
Vlan100
Vlan200
The brief information of interface(s) under bridge mode:
Interface
BAGG1
Eth3/0/1
Eth3/0/2
Eth3/0/3
Eth3/0/4
Eth3/0/5
Link Protocol-link
UP UP(spoofing)
UP UP(spoofing)
UP UP(spoofing)
DOWN DOWN
UP UP(spoofing)
DOWN DOWN
UP UP
DOWN DOWN
DOWN DOWN
DOWN DOWN
UP DOWN
Link Speed
DOWN auto
UP 100M(a)
UP 100M(a)
DOWN auto
DOWN auto
DOWN auto
1-4
Protocol type Main IP
LOOP 2.2.2.9
LOOP --
LOOP --
ETHERNET --
NULL --
TUNNEL --
ETHERNET 192.168.0.73
ETHERNET 10.1.1.2
ETHERNET 20.1.1.1
ETHERNET --
ETHERNET --
Duplex Link-type
auto access
full(a) access
full(a) access
auto hybrid
auto access
auto access
PVID
1
100
200
3
1
1