Display Lacp System-Id; Display Link-Aggregation Member-Port - 3Com S7906E Command Reference Manual

Examples
# Set the description of interface Bridge-aggregation 1 to link-aggregation interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description link-aggregation interface

display lacp system-id

Syntax
display lacp system-id
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display lacp system-id command to display the system ID of the local system (that is, the
actor). The ID comprises the system LACP priority and the system MAC address.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 000f-e200-0100
Table 1-1 display lacp system-id command output description
Actor System ID

display link-aggregation member-port

Syntax
display link-aggregation member-port [ interface-type interface-number [ to interface-type
interface-number ] ]
View
Any view
Default Level
1: Monitor level
Field
The local system ID, which comprises the LACP
system priority and the system MAC address.
1-2
Description