Display Port Combo - 3Com S7906E Command Reference Manual

No port is detected with loopback

display port combo

Syntax
display port combo
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display port combo command to display the Combo ports of a device and the corresponding
optical ports and electrical ports.
Examples
# Display the Combo ports of the device and the corresponding optical ports and electrical ports.
<Sysname> display port combo
Combo-group
1
2
3
4
5
6
7
8
Table 1-4 display port combo command output description
Field
Combo-group
Active
Inactive
As for the optical port and the electrical port of a Combo port, the one with the smaller port number is
active by default. The port number varies with device models. You can determine whether a port is an
optical port or an electrical port by checking the "Media type is" field of the display interface command.
Field
Active
GigabitEthernet0/0/25
GigabitEthernet0/0/26
GigabitEthernet0/0/27
GigabitEthernet0/0/28
GigabitEthernet0/0/29
GigabitEthernet0/0/30
GigabitEthernet0/0/31
GigabitEthernet0/0/32
Combo ports of the device, represented by Combo port number,
which is generated by the system.
Ports of the Combo ports that are active
Ports of the Combo ports that are inactive
Description
No port is currently being detected with a loopback.
Inactive
GigabitEthernet0/0/18
GigabitEthernet0/0/17
GigabitEthernet0/0/20
GigabitEthernet0/0/19
GigabitEthernet0/0/22
GigabitEthernet0/0/21
GigabitEthernet0/0/24
GigabitEthernet0/0/23
Description
1-11