Group-Member; Interface - 3Com S7906E Command Reference Manual

Use the undo flow-interval command to restore the default interval.
Examples
# Set the time interval for collecting interface statistics to 100 seconds.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] flow-interval 100

group-member

Syntax
group-member interface-list
undo group-member interface-list
View
Port group view
Default Level
2: System level
Parameters
interface-list: Ethernet interface list, in the form of interface-type interface-number [ to interface-type
interface-number ] &<1-10>, where &<1-10> indicates that you can specify up to 10 port or port ranges.
Description
Use the group-member command to add an Ethernet interface to a specified manual port group.
Use the undo group-member command to remove a specified Ethernet interface from a manual port
group.
By default, there is no Ethernet interface in a manual port group.
Examples
# Add interface Ethernet 2/0/1 to the manual port group named group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member ethernet 2/0/1

interface

Syntax
interface interface-type interface-number
View
System view
Default Level
2: System level
1-16