Display Ssh Server-Info - 3Com S7906E Command Reference Manual

Table 1-5 display ssh server session command output description
Field
Conn
Ver
Encry
State
Retry
SerType
Username

display ssh server-info

Syntax
display ssh server-info
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ssh server-info command on a client to display mappings between SSH servers and
their host public keys saved on the client.
When an SSH client needs to authenticate the SSH server, it uses the locally saved public key of the
server for the authentication. If the authentication fails, you can use this command to check the public
key of the server saved on the client.
Related commands: ssh client authentication server.
Examples
# Display the mappings between host public keys and SSH servers saved on the client.
<Sysname> display ssh server-info
Server Name(IP)
______________________________________________________
192.168.0.1
192.168.0.2
Connected VTY channel
SSH server protocol version
Encryption algorithm
Status of the session, including: Init, Ver-exchange, Keys-exchange,
Auth-request, Serv-request, Established, Disconnected
Number of authentication attempts
Service type (SFTP, Stelnet)
Name of a user during login
Server public key name
abc_key01
abc_key02
1-6
Description