Info-Center Channel Name; Info-Center Console Channel - H3C s3100 series Command Manual

#Apr 2 00:17:47:875 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -
Trap 1.3.6.1.6.3.1.1.5.3(linkDown): portIndex is 4227833, ifAdminStatus is 2, ifOperStatus
is 2
......
<Omitted>

info-center channel name

Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.
channel-name: Channel name, up to 30 characters in length. The name must start with an English letter,
containing no special character but numbers and English letters only.
Description
Use the info-center channel name command to name the channel whose number is channel-number
as channel-name.
Use the undo info-center channel command to restore the default name of the channel whose
number is channel-number.
By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost, trapbuffer,
logbuffer, snmpagent, channel6, channel7, channel8, channel9.
Do not configure two different channels with the same name.
Example
# Name channel 0 as "execconsole".
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center channel 0 name execconsole

info-center console channel

Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
1-6