Pwm-Chopper Submodule Waveforms Showing The Pulse Width (Duty Cycle) Control Of Sustaining Pulses - Texas Instruments Concerto F28M35 Series Technical Reference Manual

Table of Contents

Advertisement

ePWM Submodules
7.2.6.4.2
Duty Cycle Control
Pulse transformer-based gate drive designs need to comprehend the magnetic properties or
characteristics of the transformer and associated circuitry. Saturation is one such consideration. To assist
the gate drive designer, the duty cycles of the second and subsequent pulses have been made
programmable. These sustaining pulses ensure the correct drive strength and polarity is maintained on the
power switch gate during the on period, and hence a programmable duty cycle allows a design to be
tuned or optimized via software control.
Figure 7-37
shows the duty cycle control that is possible by programming the CHPDUTY bits. One of
seven possible duty ratios can be selected ranging from 12.5% to 87.5%.
Figure 7-37. PWM-Chopper Submodule Waveforms Showing the Pulse Width (Duty Cycle) Control of
75%
62.5%
87.5%
Duty
1/8
Duty
2/8
Duty
3/8
Duty
4/8
Duty
5/8
Duty
6/8
Duty
7/8
686
C28 Enhanced Pulse Width Modulator (ePWM) Module
Sustaining Pulses
PSCLK
50%
25%
37.5%
12.5%
Copyright © 2012–2019, Texas Instruments Incorporated
PSCLK
period
PSCLK Period
SPRUH22I – April 2012 – Revised November 2019
www.ti.com
Submit Documentation Feedback

Advertisement

Table of Contents
loading

Table of Contents