C28X Corrected Error Threshold Exceeded Flag Register (Cceflg); C28X Corrected Error Threshold Exceeded Force Register (Ccefrc); C28X Corrected Error Threshold Exceeded Flag Register (Cceflg) Field Descriptions; C28X Corrected Error Threshold Exceeded Force Register (Ccefrc) Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

Table of Contents

RAM Control Module Registers

5.2.4.10 C28x Corrected Error Threshold Exceeded Flag Register (CCEFLG)

Figure 5-62. C28x Corrected Error Threshold Exceeded Flag Register (CCEFLG)

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

Table 5-67. C28x Corrected Error Threshold Exceeded Flag Register (CCEFLG) Field Descriptions

Figure 5-63. C28x Corrected Error Threshold Exceeded Force Register (CCEFRC)

LEGEND: R/W = Read/Write; R = Read only; -n = value after reset

Table 5-68. C28x Corrected Error Threshold Exceeded Force Register (CCEFRC) Field Descriptions

Internal Memory

C28x CPU/DMA Corrected Error Count Reached Flag

This status flag is set when corrected error count on C28x CPU or DMA accesses becomes equal

to the C28x CPU/DMA corrected error threshold.

Once this bit is set, it can be cleared by setting the corresponding error clear bit in the CCECLR

C28x Correctable Error Flag Force. Any reads to this bit will return a 0.

Setting this bit to 1 sets the CCEFLG flag in the CCEFLG register.

SPRUH22I – April 2012 – Revised November 2019

Submit Documentation Feedback

Table of Contents