Lm Flash Programmer Binary Image Selection Screen - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com
Figure 6-38. LM FLASH Programmer Binary Image Selection Screen
6.8.1.2.2 Using the LM FLASH Programmer to Send Data to the M-BOOT ROM EMAC Interface –
Ethernet Bootload Option
1. Select the Ethernet option as shown below. The Client MAC field should be filled in with the EMAC IF
of the Concerto device, and the Client IP Address field should be filled with a proper IP address that
the user wants to assign to the device.
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Copyright © 2012–2019, Texas Instruments Incorporated
Application Notes to Use Boot ROM
ROM Code and Peripheral Booting
623