Software Reset Control 3 (Srcr3) Register Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

System Control Registers
Table 1-66. Software Reset Control 3 (SRCR3) Register Field Descriptions
Bit Field
31-26 Reserved
25 CAN1
24 CAN0
23:1 Reserved
0 UART4
196
System Control and Interrupts
Value Description
Reserved
CAN1 S/W Reset Control
When this bit is set, CAN01 module is reset. All internal data is lost and the registers are returned
to their reset states. This bit must be manually cleared after being set.
CAN0 S/W Reset Control
When this bit is set, CAN10 module is reset. All internal data is lost and the registers are returned
to their reset states. This bit must be manually cleared after being set.
Reserved
UART4 S/W Reset Control
When this bit is set, UART4 module is reset. All internal data is lost and the registers are returned
to their reset states. This bit must be manually cleared after being set.
Copyright © 2012–2019, Texas Instruments Incorporated
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
www.ti.com