Table of Contents
Advertisement
Application Notes to Use Boot ROM
www.ti.com
Figure 6-36. LM FLASH Programmer Interface Selection Screen
6.8.1.2.1 Using the LM FLASH Programmer to Send Data to the M-Boot ROM UART0 Interface – Serial
Bootload Option
1. Select the UART interface and configure the HOST COM Port Baud Rate as needed.
621
SPRUH22I – April 2012 – Revised November 2019
ROM Code and Peripheral Booting
Submit Documentation Feedback
Copyright © 2012–2019, Texas Instruments Incorporated
Advertisement
Chapters
Table of Contents
