Table of Contents
Advertisement
10. Log out from the Configuration Manager.
11. Click
in the user interface of the (Auerswald) Remote Access Server.
Configuring the PBX Remotely via the Internet (without
(Auerswald) Remote Access Server)
Requirements:
•
Internet connection between the computer and the PBX (for example,
DSL)
•
Permanent external IP address, or the use of VPN or DynDNS
•
A router configured for this purpose
•
Knowledge of user name and password for the Configuration Manager
•
Knowledge of the configured port of the web server
Note:
Refer to the operating manual of your router.
The access is possible via
option Force HTTPS connection has been enabled, only the https
connection can be used. In this case, a port you selected yourself must
be rerouted to port 443 of the PBX (access with
mein.dyndns.org:[Port], for example.
Important: An internal network is usually protected from actions from
the outside by, for example, a firewall integrated in the router. For
questions about configuring your firewall, contact the system adminis-
trator responsible for this topic.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Remote Configuration and Alternative Connection Options
http:
and via
https:
Functions, Uses, Concepts
(encrypted access). If the
https://
61
Advertisement
Table of Contents
