Toyota Celica 2005 Repair Manual page 2421

SST
SST SST
Battery
SST
2005 CELICA (RM1131U)
BODY
HINT:
When scrapping a vehicle, activate the seat belt pretensioner
and scrap the vehicle with activated front seat outer belt still
installed.
2. ACTIVATION WHEN DISPOSING OF FRONT SEAT
OUTER BELT ONLY
NOTICE:
When disposing of the front seat outer belt (with seat
S
belt pretensioner) only, never use the customer's ve-
hicle to activate the seat belt pretensioner.
Be sure to follow the procedure given on the next
S
page when activating the seat belt pretensioner.
HINT:
Have a battery ready as the power source when activating the
seat belt pretensioner.
(a) Remove the front seat outer belt (See page BO−109).
HINT:
Cut the belt near the seat belt retractor.
(b) Check functioning of SST (See step 1−(a)).
SST
Battery
AB0158
(c) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H12649
(2)
NOTICE:
Place the front seat outer belt as shown in the illustration.
(3)
NOTICE:
Take care not to damage the SST wire harness.
SST
H12650
− SEAT BELT PRETENSIONER
09082−00700, 09082−00740
Connect the 2 SST, then connect them to the seat
belt pretensioner.
09082−00700, 09082−00740
Place the front seat outer belt on the ground and
cover it with the disc wheel with tire.
Move the SST as least 10 m (33 ft) away from the
disc wheel.
2420
BO−115