Toyota Celica 2005 Repair Manual page 2422

BO−116
2005 CELICA (RM1131U)
BODY − SEAT BELT PRETENSIONER
(d) Activate the seat belt pretensioner.
(1) Connect the SST red clip to the battery positive (+)
terminal and black clip to the battery negative (−)
terminal.
(2) Check that no one is within 10 m (33 ft) area around
the disc wheel.
(3) Press the SST activation switch and activate the
seat belt pretensioner.
HINT:
The seat belt pretensioner operates simultaneously as the LED
of the SST activation switch lights up.
10 m (33 ft) or more
(e) Dispose of front seat outer belt (with seat belt pretension-
er).
CAUTION:
The front seat outer belt is very hot when the seat belt
S
pretensioner is activated, so leave it alone for at least
30 minutes after activation.
Use gloves and safety glasses when handling a front
S
seat outer belt with activated seat belt pretensioner.
Always wash your hands with water after completing
S
H13198
the operation.
Do not apply water, etc. to a front seat outer belt with
S
activated seat belt pretensioner.
(1) Remove the disc wheel and SST.
(2) Place the front seat outer belt in a vinyl bag, tie the
end tightly and dispose of it in the same way as oth-
er general parts.
2421
R05181