Toyota Celica 2005 Repair Manual page 2419

SST
SST
SST
SST
2005 CELICA (RM1131U)
BODY −
1. SEAT BELT PRETENSIONER ACTIVATION WHEN
SCRAPPING VEHICLE
HINT:
Battery
Have a battery ready as the power source to activate the seat
belt pretensioner.
AB0158
(a) Check functioning of SST.
CAUTION:
When activating the seat belt pretensioner, always use the
specified SST: SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the seat belt pretensioner.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(b) Disconnect the pretensioner connector.
(1)
H01580
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) Remove the rear seat outer belt floor anchor.
(11) Remove the quarter trim panel.
2418
SEAT BELT PRETENSIONER
09082−00700, 09082−00740
Connect the SST to the battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (−) terminal.
Check functioning of SST.
Press the SST activation switch, and check the LED
of the SST activation switch lights up.
Remove the door scuff plate.
Remove the package tray trim.
Remove the rear seat (See page BO−102).
Remove the luggage compartment trim.
Remove the luggage compartment mat.
Remove the rear deck trim cover.
Remove the deck trim side panel.
Remove the seatback hinge.
Remove the seatback lock striker.
BO−113