Toyota Celica 2005 Repair Manual page 2404

BO−98
Wire Harness Protector
2005 CELICA (RM1131U)
BODY − FRONT SEAT
6. INSTALL SEATBACK COVER
(a) Install the seatback cover to the seat cushion pad with
new hog rings.
HINT:
When installing the hog rings, take care to prevent wrinkles as
much as possible.
(b) Install the seatback frame to the seatback cover with pad.
(c) w/ Side airbag assembly:
Install the 7 clips.
(d) w/ Side airbag assembly:
Install the side airbag assembly as shown in the illustra-
tion.
H12638
(e) w/ Side airbag assembly:
Install the 2 nuts, then engage the clamp of side airbag
wire harness.
Torque:5.5 N·m (56 kgf·cm, 49 in.·lbf)
7. INSTALL SEATBACK ASSEMBLY
(a) Install the seatback assembly with the 4 bolts.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
(b) w/ Side airbag assembly:
Insert the side airbag wire harness into the slit of seatback
H12637
cover.
(c) w/ Side airbag assembly:
Engage the side airbag wire harness to the seat cushion
frame.
(d) w/ Side airbag assembly:
Replace the wire harness protector as shown in the il-
lustration.
(e) Zip the seatback cover closed.
(f) Install new hog rings.
HINT:
When installing the hog rings, take care to prevent wrinkles as
much as possible.
H12636
2403