Samsung S3C2451X User Manual page 632

CAMERA INTERFACE
CODEC SCAN LINE OFFSET REGISTER
Register
CICOSCYOS 0x4D80_00A8
CICOSCYOS
Reserved [31:29]
[28:16]
Initial_Yoffset_C
o
Reserved [15:13]
[12:0]
Line_Yoffset_Co
PREVIEW SCAN LINE OFFSET REGISTER
Register
CIPRSCOS 0x4D80_00AC
CIPRSCOS
Reserved [31:29]
[28:16]
Initial_offset_Pr
Reserved [15:13]
[12:0]
Line_offset_Pr
•
Scan line offset is allowed all output format.
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
23-40
Specifications and information herein are subject to change without notice.
Address R/W
RW
Bit
The number of the skipped pixels for initial offset (should be
even number for word boundary alignment). This value
must be set to 0 when scanline offset is not used. And,
scanline offset can be used only when Interleave_Co is set
to 1.
The number of the skipped pixels in the screen of the target
image when scan line is changed (should be even number
for word boundary alignment). This value must be set to 0
when scanline offset is not used. And, scanline offset can
be used only when Interleave_Co is set to 1.
Address R/W
RW
Bit
The number of the skipped pixels for initial offset (should be
even number for word boundary alignment). This value
must be set to 0 when scanline offset is not used.
The number of the skipped pixels in the screen of the target
image when scan line is changed (should be even number
for word boundary alignment). This value must be set to 0
when scanline offset is not used.
Description
Codec scan line Y offset related
Description
Description
Preview scan line offset related
Description
S3C2451X RISC MICROPROCESSOR
Reset Value
Initial
State
0
0
0
0
Reset Value
Initial
State
0
0
0
0
0
Change
State
X
O
X
O
0
Change
State
X
O
X
O