Samsung S3C2451X User Manual page 590

LCD CONTROLLER
i80-System Interface Command Control 0
Register
SIFCCON0 0x4C80013C
SIFCCON0
Reserved
SYS_CS0_CON
SYS_CS1_CON
SYS_OE_CON
SYS_WR_CON
Reserved
SYS_RS_CON
SCOMEN
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
22-50
Specifications and information herein are subject to change without notice.
Address R/W
R/W i80-System Interface Command Control
Bit
[11:10] Reserved
[9] LCD i80-System Interface SYS_CS0 (main) Signal control
0: Disable (High)
1: Enable (Low)
[8] LCD i80-System Interface SYS_CS1 (sub) Signal control
0: Disable (High)
1: Enable (Low)
[7] LCD i80-System Interface SYS_OE Signal control
0: Disable (High)
1: Enable (Low)
[6] LCD i80-System Interface SYS_WR Signal control
0: Disable (High)
1: Enable (Low)
[5:2] Reserved (Should be set be "0")
[1] LCD i80-System Interface SYS_RS Signal control
0: Low
1: High
[0] LCD i80-System Interface Command Mode Enable
0: Disable
1: Enable
S3C2451X RISC MICROPROCESSOR
Description
Description
Reset Value
0x0000_0000
Initial State
0
0
0
0
0
0
0