Table of Contents
Advertisement
Chapter 26
Voltage Reference (VREFV1)
26.1 Introduction
The Voltage Reference (VREF) is intended to supply an accurate voltage output that can
be trimmed in 0.5 mV steps. The VREF can be used in applications to provide a reference
voltage to external devices or used internally as a reference to analog peripherals such as
the ADC, DAC, or CMP. The voltage reference has three operating modes that provide
different levels of supply rejection and power consumption.
The following figure is a block diagram of the Voltage Reference.
Figure 26-1. Voltage reference block diagram
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
Freescale Semiconductor, Inc.
423
Advertisement
Table of Contents
