Table of Contents
Advertisement
Register definition
32.2.1 Features
The RTC module features include:
• 32-bit seconds counter with roll-over protection and 32-bit alarm
• 16-bit prescaler with compensation that can correct errors between 0.12 ppm and
3906 ppm
• Register write protection
• Lock register requires POR or software reset to enable write access
• 1 Hz square wave output with optional interrupt
32.2.2 Modes of operation
The RTC remains functional in all low power modes and can generate an interrupt to exit
any low power mode.
32.2.3 RTC signal descriptions
Signal
RTC_CLKOUT
32.2.3.1 RTC clock output
The clock to the seconds counter is available on the RTC_CLKOUT signal. It is a 1 Hz
square wave output. See
32.3 Register definition
All registers must be accessed using 32-bit writes and all register accesses incur three
wait states.
Write accesses to any register by non-supervisor mode software, when the supervisor
access bit in the control register is clear, will terminate with a bus error.
Read accesses by non-supervisor mode software complete as normal.
514
Table 32-1. RTC signal descriptions
Description
1 Hz square-wave output or OSCERCLK
RTC_CLKOUT options
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
for details.
Freescale Semiconductor, Inc.
I/O
O
Advertisement
Table of Contents
