Table of Contents
Advertisement
Functional Description
Last program flash address
Flash protection features are discussed further in
Using the Kinetis Security and Flash Protection Features
all features described in the application note are available on
this device.
45.4.2 Interrupts
The flash memory module can generate interrupt requests to the MCU upon the
occurrence of various flash events.
These interrupt events and their associated status and control bits are shown in the
following table.
Flash Event
Flash Command Complete
Flash Read Collision Error
Vector addresses and their relative interrupt priority are
determined at the MCU level.
902
0x0_0000
Program flash size / 32
Program flash size / 32
Program flash size / 32
Program flash size / 32
Program flash size / 32
Program flash size / 32
Program flash size / 32
Figure 45-2. Program flash protection
NOTE
Table 45-1. Flash Interrupt Sources
Note
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
Program flash
FPROT3[PROT0]
FPROT3[PROT1]
FPROT3[PROT2]
FPROT3[PROT3]
FPROT0[PROT29]
FPROT0[PROT30]
FPROT0[PROT31]
AN4507:
Readable
Status Bit
FSTAT[CCIF]
FSTAT[RDCOLERR]
. Not
Interrupt
Enable Bit
FCNFG[CCIE]
FCNFG[RDCOLLIE]
Freescale Semiconductor, Inc.
Advertisement
Table of Contents
