Uart 7816 Wait Parameter Register (Uartx_Wp7816); Uart 7816 Wait N Register (Uartx_Wn7816) - NXP Semiconductors MKL27Z128VFM4 Reference Manual

38.4.16 UART 7816 Wait Parameter Register (UARTx_WP7816)

The WP7816 register contains the WTX variable used in the generation of the block wait
timer. This register may be read at any time. This register must be written to only when
C7816[ISO_7816E] is not set.
Address: 4006_C000h base + 1Bh offset = 4006_C01Bh
Bit 7
Read
Write
Reset
0
Field
WTX Wait Time Multiplier (C7816[TTYPE] = 1)
Used to calculate the value used for the BWT counter. It represents a value between 0 and 255. This
value is used only when C7816[TTYPE] = 1. See

38.4.17 UART 7816 Wait N Register (UARTx_WN7816)

The WN7816 register contains a parameter that is used in the calculation of the guard
time counter. This register may be read at any time. This register must be written to only
when C7816[ISO_7816E] is not set.
Address: 4006_C000h base + 1Ch offset = 4006_C01Ch
Bit 7
Read
Write
Reset 0
Field
GTN Guard Band N
Defines a parameter used in the calculation of GT, CGT, and BGT counters. The value represents an
integer number between 0 and 255. See
Freescale Semiconductor, Inc.
Chapter 38 Universal Asynchronous Receiver/Transmitter(UART)
6 5
0 0
UARTx_WP7816 field descriptions
6 5
0 0
UARTx_WN7816 field descriptions
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
4 3
WTX
0 0
Description
Wait time and guard time
4 3
GTN
0 0
Description
Wait time and guard time parameters
2 1
0 0
parameters.
2 1
0 0
.
0
0
0
0
701