Interrupt Enable Register (Usbx_Inten) - NXP Semiconductors MKL27Z128VFM4 Reference Manual

Memory map/Register definitions

33.5.6 Interrupt Enable register (USBx_INTEN)

Contains enable fields for each of the interrupt sources within the USB Module. Setting
any of these bits enables the respective interrupt source in the ISTAT register. This
register contains the value of 0x00 after a reset.
Address: 4007_2000h base + 84h offset = 4007_2084h
Bit 7
Read
STALLEN
Write
Reset 0
Field
7 STALL Interrupt Enable
STALLEN
0 Diasbles the STALL interrupt.
1 Enables the STALL interrupt.
6 This field is reserved.
Reserved This read-only field is reserved and always has the value 0.
5 RESUME Interrupt Enable
RESUMEEN
0 Disables the RESUME interrupt.
1 Enables the RESUME interrupt.
4 SLEEP Interrupt Enable
SLEEPEN
0 Disables the SLEEP interrupt.
1 Enables the SLEEP interrupt.
3 TOKDNE Interrupt Enable
TOKDNEEN
0 Disables the TOKDNE interrupt.
1 Enables the TOKDNE interrupt.
2 SOFTOK Interrupt Enable
SOFTOKEN
0 Disbles the SOFTOK interrupt.
1 Enables the SOFTOK interrupt.
1 ERROR Interrupt Enable
ERROREN
0 Disables the ERROR interrupt.
1 Enables the ERROR interrupt.
0 USBRST Interrupt Enable
USBRSTEN
0 Disables the USBRST interrupt.
1 Enables the USBRST interrupt.
546
6 5
0
RESUMEEN SLEEPEN
0 0
USBx_INTEN field descriptions
KL27 Sub-Family Reference Manual , Rev. 5, 01/2016
4 3
TOKDNEEN SOFTOKEN ERROREN USBRSTEN
0 0
Description
2 1
0 0
Freescale Semiconductor, Inc.
0
0