Registration Acceleration Control; Transfer; Post-Transfer Guide Attraction Control - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Pickup / Feed System > Transfer > Post-transfer Guide Attraction Control

■ Registration Acceleration Control

The Registration Motor (M34) is rotated to make the image on the drum and the paper to be
aligned at the specified position and feeds the paper to the Transfer Assembly. The rotating
speed of the Registration Motor (M34) is increased to be higher than the process speed and
then reduced to meet the process speed.
Post-registration speed
Speed of Registration Roller
Start point of
deceleration
Registration Roller point
Model ImageRUNNER ADVANCE 6075/6065/6055
PPM 75
Post-registration speed
Process speed 350[mm/s]
start point of deceleration 48.6[mm]
2 Technology > Pickup / Feed System > Transfer > Post-transfer Guide Attraction Control
Process speed
10mm
Transfer point
F-2-179
65 55
500[mm/s]
290[mm/s]
46.4[mm]
T-2-79

Transfer

■ Post-transfer Guide Attraction Control

With this machine, paper is attracted to the Post-transfer Guide by exhaust from the Image
Formation System Exhaust Fan (FM3). Therefore, behavior of papers between transfer and
fixing becomes stable, which increase the paper feed capabilities.
2-138
Post-transfer Guide
Paper
Duct
Paper
Post-transfer Guide
Duct
F-2-180
2-138