Canon imageRUNNER ADVANCE 6075 Series Service Manual page 194

2
Technology > Pickup / Feed System > Delivery/Reverse Unit > Basic Operation
● Face-down Delivery
1) The Reverse Upper Flapper Solenoid (SL5) is turned OFF to switch the feeding path to the
Delivery Assembly side.
2) Rotating speed of the Reverse Motor (M14) is increased (reverse feed speed) once the
trailing edge of the preceding paper passes through the Fixing Roller to make the paper
stopped/rotate reversely at the reverse position (reverse delivery speed)
3) Succeeding paper is fed to the reverse path to make the Reverse Motor (M14) stopped/
rotate normally.
4) Succeeding paper is fed to the reverse stop position.
5) Once the trailing edge of the preceding paper reaches the specified position, rotating
speed of the Delivery Motor (M13) is reduced.
NOTE:
Delivery speed is changed according to the paper size. Delivery speed remains
the same if no delivery option is connected.
Outer Delivery Roller
M13
SL5
Reverse Vertical
Path Sensor
(PS65)
Reverse Upper Roller
Reverse Lower Roller
2 Technology > Pickup / Feed System > Delivery/Reverse Unit > Basic Operation
Outer Delivery Roller
M14
F-2-183
Reverse delivery speed
Delivery Motor
(M13)
Reverse feed
speed
Process
speed
Reverse Motor
(M14)
Reverse Upper
Flapper Solenoid
(SL5)
20 mm before Outer Delivery Roller
60 mm before Fixing Roller
(Based on Outer-Delivery-Roller ON)
(Based on Registration Sensor )
20 mm after Fixing Roller
(Based on Inner Delivery Sensor)
Model ImageRUNNER ADVANCE6075/6065/6055 [mm/s]
PPM 75
Process speed 350
Reverse feed speed
Reverse delivery speed
Delivery speed
2-140
Reverse delivery
speed
Delivery
speed
Reverse delivery
speed
Process
speed
Stop
50ms
20 mm after Outer Delivery Roller
(Based on Outer-Delivery-Roller OFF)
65 55
290
750
750
350/750(ACC)
2-140
F-2-184
T-2-81