2.2.5 Connection of the Cable
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1) Fix the reader communication cable [2] in place with the 3 wire saddles
[1] to connect the connector of the both sides to the host machine.
[1]
F-2-30
2) Connect the power code to the host machine.
Use the correct power code to mach the location/area of installation.
Make sure not to leave unused power code at the site.
3) Connect the power plug of the host machine and of other devices to the
outlet.
4) Turn ON the power switch of the host machine.
2.2.6 Connection of the Cable
iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Fix the reader communication cable [2] in place with the 3 wire saddles
[1] to connect the connector of the both sides to the main body.
[1]
F-2-31
2) Connect the power code to the host machine.
Use the correct power code to mach the location/area of installation. Make
sure not to leave unused power code at the site.
3) Connect the power plug of the host machine and of other devices to the
outlet.
4) Turn ON the power switch of the host machine.
2.2.7 Points to Note When Turning Off the Main Power
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
0018-6308
[1]
[2]
0017-2740
[1]
[2]
0013-8256
How to Turn Off the Main Power
When turning off the main power, be sure to go through the following steps
to protect the hard disk:
1) Hold down the control panel power switch for 3 sec or more.
2) Follow the instructions on the shutdown sequence screen to let the main
power switch be ready to turn off.
3) Turn off the power switch.
4) Disconnect the power plug.
2.2.8 Attaching Other Parts
iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
<Service book container>
1) Remove the release paper of the double-sided tape on the rib area of the
service book container [1], and attach the service book container on the
bottom plate of the pedestal.
Do not attach the service container:
- Inside the machine.
- in the position onto which attachment of the service book container may
block off the louver area.
- in the position onto which attachment of the service book container may
block off the grip area.
MEMO:
In case there is no pedestal, attach the service book container on the left
cover of the host machine.
F-2-32
<Touch Pen>
1) Place the touch pen [1] in the control panel.
Chapter 2
0018-8414
2-11