Canon imageRUNNER ADVANCE 6075 Series Service Manual page 157

2
Technology > Fixing > Controls > Fixing temperature control
● Temperature Control for Standby
To provide measures against temperature rise of the coil/Main Body and save energy
consumption, the target temperature is reduced step by step on a specified time basis until it
reaches a certain temperature.
Fixing Roller
temperature(deg C)
190
185
180
1
5
2 Technology > Fixing > Controls > Fixing temperature control
Time(min)
10
F-2-133
The control temperature depends on the environment temperature/country. The details on the
control temperature are shown below.
• Normal environment 17 degC or higher
Destination Model
Japanese imageRUNNER ADVANCE 6075
mageRUNNER ADVANCE 6065
imageRUNNER ADVANCE 6055
Non Japanese imageRUNNER ADVANCE
6075/6065/6055
• Low temperature environment Lower than 17 degC
Destination Model
Japanese imageRUNNER ADVANCE
6075/6065/6055
Non Japanese imageRUNNER ADVANCE
6075/6065/6055
NOTE:
When restoring from the recovery mode, temperature control is conducted from the
2nd line of temperature control table.
2-103
Time (minute)
0 to 1 1 to 5 5 to 10 10 and
longer
185 180 175 170
185 180 175 170
180 175 170 170
190 185 180 175
T-2-59
Time (minute)
0 to 5 5 to 10 10 to 20 20 and
longer
190 185 180 175
195 190 185 180
T-2-60
2-103