Canon imageRUNNER ADVANCE 6075 Series Service Manual page 159

2
Technology > Fixing > Controls > Fixing temperature control
● Other temperature adjustments
<Energy Saver mode>
By pressing the energy saver key on the Control Panel, energy consumption is reduced by
reducing the control temperature when the Fixing Unit is at standby state according to the
energy saving rate.
NOTE:
To be recovered to the normal mode according to the recovery mode.
NOTE:
The energy saving rate can be changed from "Settings/Registration > Preferences >
Timer/Energy Settings > Change Energy Saver Mode".
(Default: -10%)
<Low power mode>
To save energy, in the case that no operation has been executed for a certain period of time,
this machine is automatically to be in Low Energy Mode. Power distribution to the Fixing Unit
is turned OFF in Low Energy Mode.
NOTE:
To be recovered to the normal mode according to the temperature control at warm-up.
NOTE:
The time to change to the low power mode can be changed from "Settings/Registration
> Preferences > Timer/Energy Settings > Auto Sleep Time".
(Default: 1 min.)
2 Technology > Fixing > Controls > Fixing temperature control
● Related Error Code
E000: Fixing Assembly low temperature error
E001: Fixing Assembly high temperature error
E002: Fixing Assembly temperature rise error
E003: Fixing Assembly temperature decrease error
E004: Fixing Power Supply error
CAUTION:
When any of the above Error Codes, E000 to E0004, is displayed, the error code
display will not be cleared even though the Main Power Switch is turned OFF. In
such a case, cancel the error by the following service mode and turn OFF and then
ON the power.
COPIER>FUNCTION>CLEAR>ERR:Clear of error code
● Related Service Mode
Selection of fixing improvement mode
COPIER> OPTION> IMG-FX> FSPD-S1
Setting of paper wrinkle prevention mode
COPIER> OPTION> IMG-FIX> FX-WNKL
2-105
2-105