Pickup Retry Control - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Pickup / Feed System > Deck/Cassette Pickup Unit > Pickup Retry Control
● Lifter Error Detection
In case due to some reason the lifter keep ascending even the Paper Surface Height Sensor
is turned ON, the Upper Limit Sensor is provided to prevent damage in this equipment due to
the error in ascending.
And, if the lifter starts ascending, but not detected by the Paper Surface Sensor and the
Upper Limit Sensor within 3 minutes, the alarm corresponds to the concerned Pickup
Cassette will be triggered. The alarm will release if the corresponding deck/cassette is open
or closed, or the power is turned OFF/ON.

■ Pickup Retry Control

If paper leading edge is not detected by Pickup sensor within the specified time after pickup
movement starts, it is not immediately determined as jam, and re-pickup movement will be
executed.
During pickup retry, the Pickup Motor will be repeatedly turned ON/OFF with the Pickup Roller
is in descended condition.
2 Technology > Pickup / Feed System > Deck/Cassette Pickup Unit > Pickup Retry Control
2-133
2-133