Show Ip Dhcp Binding - Dell Z9500 Command Reference Manual

show ip dhcp binding

Display the DHCP binding table.
Z9500
Syntax
show ip dhcp binding
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# show ip dhcp binding
IP address
1.1.1.253
Automatic
1.1.1.254
Automatic
show ip dhcp snooping
Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.
Z9500
Syntax
show ip dhcp snooping [binding | source-address-validation]
Parameters
binding
source-
address-
validation
Defaults none
736
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Hardware address
00:00:00:00:00:10
00:00:00:00:00:20
Display the interfaces configured with IP Source Guard.
Display the interfaces configured with IP Source Guard.
Dynamic Host Configuration Protocol (DHCP)
Lease expiration
Jan 08 2014 23:57
Jan 08 2014 23:57
Type