Hash-Algorithm Hg-Seed - Dell Z9500 Command Reference Manual

Defaults crc16 algorithm
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.4

hash-algorithm hg-seed

Select the seed value used in HiGig hashing.
Z9500
Syntax
[no] hash-algorithm hg-seed number [linecard slot-id port-set
port-pipe]
Parameters
hg-seed
number
linecard slot-id
port-set port-
pipe
Defaults 32-bit chassis MAC and system time
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
746
Description
Introduced on the Z9500.
Introduced on the Z9000.
Enter the keywords hg-seed then the hash algorithm seed
value. The range is from 0 to 2147483646.
(Optional) Enter the line-card slot ID and port-pipe number
for the set of ports for which you configure HiGig hashing.
The range of Z9500 slot IDs is 0 to 2. The range of port-pipe
numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and
2.
Description
Introduced on the Z9500.
Equal Cost Multi-Path (ECMP)