Ip Dhcp Snooping Verify Mac-Address - Dell Z9500 Command Reference Manual

ip dhcp snooping verify mac-address

Validate a DHCP packet's source hardware address against the client hardware address field (CHADDR) in
the payload.
Z9500
Syntax
[no] ip dhcp snooping verify mac-address
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.2.1.0
ipv6 dhcp snooping verify mac-address
Syntax
[no] ipv6 dhcp snooping verify mac-address
To disable verify source mac-address against IPv6 DHCP packet MAC address, use
the no ipv6 dhcp snooping verify mac-address command.
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
732
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP)