Ip Dhcp Source-Address-Validation - Dell Z9500 Command Reference Manual

Parameters
vlan-id
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command-Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)

ip dhcp source-address-validation

Enable the IP Source Guard.
Z9500
Syntax
[no] ip dhcp source-address-validation [ipmac]
Parameters
ipmac
Defaults Disabled
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
8.2.1.0
7.8.1.0
734
Enter the name of a VLAN id or list of the VLANs to enable
DHCP Snooping.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
Enable IP+MAC Source Address Validation.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Added the keyword ipmac.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP)