Ip Msdp Redistribute - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
7.5.1.0
6.2.1.1
Usage Information The connect-source option is used to supply a source IP address for the TCP
connection. When an interface is specified using the connect-source option, the
primary configured address on the interface is used.
If the total number of SA messages received from the peer is already larger than the
limit when this command is applied, those SA messages continue to be accepted. To
enforce the limit in such situation, use the clear ip msdp peer command to reset
the peer.
Related
ip msdp sa-limit
Commands
clear ip msdp peer
show ip msdp

ip msdp redistribute

Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until
they time out, they continue to reside in the MSDP SA cache.
C9000 Series
Syntax
ip msdp redistribute [list acl-name]
Parameters
list acl-name
Defaults Not configured.
Command Modes CONFIGURATION
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Added option for SA upper limit and the description option.
Introduced
— configures the MSDP SA Limit.
— clears the MSDP peer.
— displays the MSDP information.
lEnter the name of an extended ACL that contains permitted
SAs. If you do not use this option, all local entries are blocked.
Multicast Source Discovery Protocol (MSDP) 1412