Upgrading G250 Firmware Using The Cli Via Ftp/Tftp - Avaya G250 Installing And Upgrading

Hide thumbs Also See for G250:
Table of Contents

Advertisement

Note:
The CD-ROM may not contain the latest firmware. Therefore, you should check
Note:
the Avaya Support Web site for the latest firmware versions and match these
against the versions in the directory. If the CD-ROM does not contain the latest
versions, you should download the latest versions from the Support Web site to
the laptop.
4. Connect the laptop to the services port of the S8300 Server.
5. Access Avaya IW. See
6. Run Avaya IW to perform the required upgrades:
See
upgrading Avaya CM software.
See
upgrading G250 firmware.

Upgrading G250 firmware using the CLI via FTP/TFTP

You can upgrade firmware via FTP/TFTP using the CLI. You can perform the upgrade remotely
via a modem connection, but the upgrade files must first be downloaded to an FTP or TFTP
server on the LAN connected to the G250.
1. Prepare installation worksheets. See
2. Set up an FTP or TFTP server on the LAN connected to the G250. For information about
setting up a TFTP server, see
Note:
If you use an FTP server, the G250 prompts you for a username and password
Note:
when you enter a command to transfer a file. Also, when opening an FTP
connection to the S8300, all anonymous FTP file transfers are restricted to the
/var/home/ftp/pub directory. Permission for anonymous FTP users to create files
in other directories is denied.
3. Download the firmware files to the FTP or TFTP server. See
files to a local TFTP server
S8300 Server
4. Connect to the G250 via modem or via the CON port on the front panel. For information
about connecting and enabling a modem for remote access, see
and enabling a modem for remote access
5. Run CLI commands. See
page 74.
Running the Avaya Installation Wizard (Avaya IW)
Running the Avaya Installation Wizard (Avaya IW)
Running the Avaya Installation Wizard (Avaya IW)
on page 76 or
on page 77.
CLI Commands for upgrading G250 firmware via FTP/TFTP
Upgrading G250 firmware using the CLI via FTP/TFTP
Preparing installation worksheets
Setting up a TFTP server
Installing firmware from the TFTP server on the
on page 49.
on page 129.
on page 129 for instructions for
on page 129 for instructions for
on page 75.
on page 75.
Downloading G250 firmware
Chapter 4: Connecting
Issue 6 November 2009
on
73

Advertisement

Table of Contents
loading

Table of Contents