Upgrading G350 Firmware Using The Cli Via Ftp/Tftp; Cli Commands For Upgrading G350 Firmware Via Ftp/Tftp - Avaya G350 Installing And Upgrading

Upgrading the G350 firmware

Upgrading G350 firmware using the CLI via FTP/TFTP

You can upgrade firmware via FTP/TFTP using the CLI. You can perform the upgrade remotely
via a modem connection, but the upgrade files must first be downloaded to an FTP or TFTP
server on the LAN connected to the G350.
1. Prepare installation worksheets. See
2. Set up an FTP or TFTP server on the LAN connected to the G350. For information about
setting up a TFTP server, see
Note:
If you use an FTP server, the G350 prompts you for a username and password
Note:
when you enter a command to transfer a file. Also, when opening an FTP
connection to the S8300, all anonymous FTP file transfers are restricted to the
/var/home/ftp/pub directory. Permission for anonymous FTP users to create files
in other directories is denied.
You must enable the S8300 FTP server from the Maintenance web page. The
S8300 FTP server disables itself after 15 minutes.
3. Download the firmware files to the FTP or TFTP server. See
files to a local TFTP server
S8300 Server
4. Connect to the G350 via modem or via the Console port on the front panel. For information
about connecting and enabling a modem for remote access, see
and enabling a modem for remote access
5. Run CLI commands. See
page 86.

CLI commands for upgrading G350 firmware via FTP/TFTP

You can use CLI commands to upload an upgrade file to the G350. For each of these
commands, include the full path of the file and the IP address of the FTP or TFTP host as
parameters. You must use the specific path to the file on the FTP or TFTP server according to
the home directory of the service (FTP or TFTP) that you are using. When you enter the
command, the CLI prompts you for a username and password.
Use the copy ftp EW_archive command to upgrade the Java applet for Avaya G350
●
Manager software from an FTP server
Use the copy ftp module command, followed by the module number of the module you
●
want to upgrade, to upgrade the firmware on a media module from an FTP server
Use the copy ftp SW_imageA command to upgrade the G350 firmware into Bank A
●
from an FTP server
86 Installation and Upgrades for the Avaya G350 Media Gateway
Setting up a TFTP server
on page 89 or
on page 90.
CLI commands for upgrading G350 firmware via FTP/TFTP
Preparing installation worksheets
on page 89.
Installing firmware from the TFTP server on the
on page 61.
on page 87.
Downloading G350 firmware
Chapter 4: Connecting
on