Neighbor Bfd Disable - Dell MXL 10GbE Reference Manual

Usage
When you enable a BFD session with a specified BGP neighbor or peer group using
Information
the bfd neighbor command, the default BFD session parameters are used
(interval: 100 milliseconds, min_rx: 100 milliseconds, multiplier: 3 packets, and
role: active) if you have not specified parameters with the bfd neighbor
command.
When you explicitly enable a BGP neighbor for a BFD session with the bfd
neighbor command:
•
•
Related
bfd neighbor
Commands
discover.

neighbor bfd disable

BGP peer group.
show bfd neighbors
specified interface.
neighbor bfd disable
Explicitly disable a BFD session with a BGP neighbor or a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} bfd disable
Parameters
ip-address
peer-group-
name
Defaults none
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
When you explicitly disable a BGP neighbor for a BFD session with the neighbor
Information
bfd disable command:
306
The neighbor does not inherit the global BFD enable values configured with the
bfd neighbor command or configured for the peer group to which the
neighbor belongs.
The neighbor only inherits the global timer values configured with the bfd
neighbor command: interval, min_rx, and multiplier.
— enables BFD sessions with all neighbors the Layer 3 protocols
— explicitly disables a BFD session with a BGP neighbor or a
— displays the BFD neighbor information on all interfaces or a
Enter the IP address of the BGP neighbor that you want to
explicitly disable for BFD sessions in dotted decimal format
(A.B.C.D).
Enter the name of the peer group that you want to explicitly
disable for BFD sessions.
Introduced on the MXL 10/40GbE Switch IO Module.
Bidirectional Forwarding Detection (BFD)