Debug Isis Local-Updates - Dell Z9500 Command Reference Manual

all
events
hello
states
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other
History
platforms,refer to the relevant Dell Networking OS Command Line Reference
Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)

debug isis local-updates

To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic
information.
Z9500
Syntax
debug isis local-updates [interface]
To turn off debugging, use the no debug isis local-updates [interface]
command.
Parameters
interface
Intermediate System to Intermediate System (IS-IS)
graceful-restart details tied to the VRF that you specify. This
information includes GR Hello, Internal State, and Event
Debug details.
Enter the keyword all to enable debugging information that
includes all the logs that are related to graceful-restart.
Enter the keyword events to enable debugging information
that includes logs that are related to generated events.
Enter the keyword hello to enable debugging information
that includes restart TLV related information.
Enter the keyword states to enable debugging information
that includes state machine related information.
Description
Added support for VRF. Introduced on the S6000-ON.
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
1063