Command Modes
EXEC Privilege
Command History
Version 8.3.12.0
debug isis local-updates
Enables debugging on a specific interface and provides diagnostic information to debug IS-IS local update packets.
E-Series, S4810
Syntax
debug isis local-updates [interface]
To turn off debugging, use the no debug isis local-updates [interface]
command.
Parameters
interface
Command Modes
EXEC Privilege
Command History
Version 8.3.12.0
Version 6.3.1.0
972
Introduced on the S4810.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
•
For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
•
For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
•
For a SONET interface, enter the keyword sonet followed by
the slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
•
For a VLAN, enter the keyword vlan followed by a number
from 1 to 4094.
Introduced on the S4810.
Introduced.