Bgp Always-Compare-Med - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Related neighbor add-path
Commands multiple path advertisements.

bgp always-compare-med

Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different
external ASs.
Syntax
bgp always-compare-med
To disable comparison of MED, enter no bgp always-compare-med.
Defaults Disabled (that is, the software only compares MEDs from neighbors within the
same AS).
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
Any update without a MED attribute is the least preferred route.
Information
If you enable this command, use the clear ip bgp * command to recompute
the best path.
bgp asnotation
Allows you to implement a method for AS number representation in the command line interface (CLI).
Syntax
bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Border Gateway Protocol IPv4 (BGPv4)
Introduced on the MXL 10/40GbE Switch IO Module.
— specifies that this neighbor/peer group can send/receive
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the MXL 10/40GbE Switch IO Module.
313