Bgp Non-Deterministic-Med - Dell MXL 10GbE Reference Manual

BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.

bgp non-deterministic-med

Compare MEDs of paths from different autonomous systems.
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
In Non-Deterministic mode, paths are compared in the order in which they arrive.
Information
This method can lead to the system choosing different best paths from a set of
paths, depending on the order in which they are received from the neighbors
because MED may or may not get compared between adjacent paths. In
Deterministic mode (no bgp non-deterministic-med), the system compares
MED between adjacent paths within an AS group because all paths in the AS group
are from the same AS.
When you change the path selection from Deterministic to Non-Deterministic, the
path selection for the existing paths remains Deterministic until you enter the
clear ip bgp command to clear existing paths.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax
bgp recursive-bgp-next-hop
To disable next-hop resolution, use the no bgp recursive-bgp-next-hop
command.
Defaults Enabled
Command ROUTER BGP
Modes
324
Introduced on the MXL 10/40GbE Switch IO Module.
Border Gateway Protocol IPv4 (BGPv4)