Motorola DragonBall MC9328MX1 Reference Manual page 353

Table 16-36. RF Status Register Description (Continued)
Name
PEAK_HLD
Bit 8
RSSI_EN
Bit 7
PWM_TX_EN
Bit 6
BT5_OE
Bit 5
BT1_CONT
Bit 4
BT11_AUTO_SPIKE
Bit 3
DELAY_HOP_STROBE
Bits 2–0
MOTOROLA
Description
Peak Hold for the RSSI PWM
Operation—Indicates the mode of operation of
the PWM_RSSI.
Enable for the PWM_RSSI—Indicates whether
the PWM_RSSI operation is enabled.
Enable for the PWM_TX—Indicates whether the
PWM_TX operation is enabled.
Enable BT5 as an Output—Controls the direction
of the BT5 pad.
BT1 Continuous Output—Controls the gating of
BT1 clock output.
Enable Auto Spike Generation—Controls the
automatic generation of a spike on EOF.
Delay HOP Strobe—Delays the HOP strobe on
BT9 in the SiliconWave radio.
Bluetooth Accelerator (BTA)
Programming Model
Settings
0 = PWM_RSSI tracks the analog
RSSI
1 = PWM_RSSI remains at last
peak value
0 = Disable the RSSI PWM
operation
1 = Enable the RSSI PWM
operation
0 = Disable the TX PWM
operation
1 = Enable the TX PWM
operation
0 = BT5 is an input
1 = BT5 is an output
0 = BT1 clock output is gated
1 = BT1 clock output is
continuous
0 = Do not generate spike on
EOF
1 = Generate spike on EOF
000 = No delay
001 = 2µs
010 = 4µs
100 = 8µs
111 = 15µs
16-53