Motorola DragonBall MC9328MX1 Reference Manual page 351

Table 16-35. RF Control Register Description (Continued)
Name
PEAK_HLD
Bit 8
RSSI_EN
Bit 7
PWM_TX_EN
Bit 6
BT5_OE
Bit 5
BT1_CONT
Bit 4
BT11_AUTO_SPIKE
Bit 3
DELAY_HOP_STROBE
Bits 2–0
MOTOROLA
Description
Peak Hold for the RSSI PWM
Operation—Selects the PWM_RSSI peak hold
mode. If peak hold is disabled (PEAK_HLD = 0),
the RSSI will be continuously updated during data
packet reception.
Enable for the PWM_RSSI—Controls the
PWM_RSSI operation.
Enable for the PWM_TX—Controls the PWM_TX
operation.
Enable BT5 as an Output—Controls the direction
of the BT5 pin.
BT1 Continuous Output—Controls the gating of
BT1 clock output.
Enable Auto Spike Generation—Controls the
automatic generation of a spike on EOF.
Delay HOP Strobe—Delays the HOP strobe on
BT9 in the SiliconWave radio.
Bluetooth Accelerator (BTA)
Programming Model
Settings
0 = PWM_RSSI tracks the analog
RSSI
1 = PWM_RSSI remains at last
peak value
0 = Disable the RSSI PWM
operation
1 = Enable the RSSI PWM
operation
0 = Disable the TX PWM
operation
1 = Enable the TX PWM
operation
0 = BT5 is an input
1 = BT5 is an output
0 = BT1 clock output is gated
1 = BT1 clock output is
continuous
0 = Do not generate spike on
EOF
1 = Generate spike on EOF
000 = No delay
001 = 2µs
010 = 4µs
100 = 8µs
111 = 15µs
All other settings reserved
16-51