Snmp-Agent Trap Queue-Size; Snmp-Agent Trap Source - H3C SR6600 Command Reference Manual

Related commands
snmp-agent trap enable
•
snmp-agent target-host
•

snmp-agent trap queue-size

Use snmp-agent trap queue-size to set the size of the trap sending queue.
Use undo snmp-agent trap queue-size to restore the default queue size.
Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
Default
Up to 100 traps can be stored in the trap sending queue.
Views
System view
Default command level
3: Manage level
Parameters
size: Specifies the number of traps that can be stored in the trap sending queue. The value range is 1 to
1000.
Usage guidelines
Traps are saved into the trap sending queue when generated. The size of the queue determines the
maximum number of the traps that can be stored in the queue. When the size of the trap sending queue
reaches the configured value, the newly generated traps are saved into the queue, and the earliest ones
are discarded.
Examples
# Set the maximum number of traps that can be stored in the trap sending queue to 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200
Related commands
snmp-agent target-host
•
snmp-agent trap enable
•
snmp-agent trap life
•

snmp-agent trap source

Use snmp-agent trap source to specify the source IP address contained in the trap.
Use undo snmp-agent trap source to restore the default.
Syntax
snmp-agent trap source interface-type { interface-number | interface-number.subnumber }
124