None Of The Created Elements Are Visible In This View; None Of The Selected Elements Can Be Added To This Option Set; Option Conflict Between Rooms - Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual

This error occurs when you try to add a hosted component to a design option without its host. In order for
a hosted component to be part of a design option, its host must also be part of the design option. The host
cannot belong to the main model. For example, you cannot add a window to a design option unless the
host wall is also part of the design option. You cannot add a skylight to a design option unless the host roof
is also part of the design option.
The error can also appear when you try to move a hosted component from the main model to a design
option without its host. (See
on page 731.)
Solution: To resolve the issue, move the host element to the design option. Then you will be able to add the
hosted component to the design option. See
on page 1246.
If you later incorporate the selected design option into the main model, the host element again becomes
part of the main model. See

None of the Created Elements Are Visible in This View

Issue: This error occurs when you add an element to a design option, but the element will not be visible in
the current view. This may be due to visibility of elements for the view or design option settings for the
view.
Solution: To resolve the issue, try the following:
Check visibility of elements in the view.
Click View menu
check the Visibility settings for the types of elements that you added. If visibility for these elements is
turned off, select the Visibility check box to make them visible. See
Project Views
Check design option settings for the view.
Click View menu
option set. If they are not set to Automatic or to the active option, change the settings. See
the Design Option Settings for a View

None of the Selected Elements Can Be Added to This Option Set

Issue: This error appears when you have attempted to move an element from the main model to one or
more design options.
Solution: Expand the error message to determine a more specific cause and possible solutions.

Option Conflict Between Rooms

Issue: This warning appears when either of the following occurs:
You add a room to the primary option, and the main model already contains a room in the same space.
You add a room to the main model, and the primary option already contains a room in the same space.
Solution: To resolve the issue, delete the room from the main model or from the primary option. (You can
press CTRL+Z to undo the Add Room command.) If the room should be defined in the primary option instead
of the main model, see
Interdependent Elements in Design Options
Incorporating a Design Option into the Main Model
Visibility/Graphics. On the Model Categories tab and Annotation Categories tab,
on page 150.
Visibility/Graphics. On the Design Options tab, check the settings for each design
Moving Elements from the Main Model to a Design Option Set
None of the Created Elements Are Visible in This View | 1261
Moving Elements from the Main Model to a Design Option Set
on page 1253.
on page 1256 and Hosted Components
on page 1251.
Visibility and Graphic Display in
on page 1246.
Checking