Multi-Path Call Forwarding - Auerswald COMmander 6000 Advanced Information

Multi-path Call Forwarding

Multi-path call forwarding is used to signal internal and external calls, in
addition to call distribution for an internal or an external number, e.g., on a
mobile phone. Multi-path call forwarding is also executed if the "main phone
number" is, for example, busy. If call forwarding for external numbers is
additionally enabled, multi-path call forwarding might work only limited.
Proceed as follows for configuration:
• Switching multi-path call forwarding on.
– Using the Configuration Manager (on the following pages)
– For subscribers: Subscriber (scr.) > Properties > Reachability
– For groups: Groups > Properties > Reachability
– Using a character string on the internal or external phone (see
chapter Short Reference > Follow-me)
• Configuring multi-path call forwarding configuration dependent.
– Using the Configuration Manager (on the following pages)
– For subscribers: Subscriber (scr.) > Profiles > ... > Reachability
– For groups: Groups > Profiles > ... > Reachability
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Multi-path Call Forwarding
139